Audi R8 V10 Supercharger System

Audi R8 V10 supercharger system

Audi R8 V10 supercharger system

 

Torque Developments International is delighted to offer this bolt-on supercharger system which has been professionally developed and engineered for the Audi R8 GT V10 model from 2009 onwards with either manual or Rtronic/Stronic transmission.

Using an OEM quality Eaton positive displacement TVS supercharger (as used by Jaguar, Mercedes etc) to provide life-long durability, the whole system is engineered to provide instant throttle response and a smooth transition to very impressive performance.

Positive boost pressure is available from only 1500rpm and continues unabated through to the red line and 760hp. Torque delivery is astonishing at 600 ft/lbs and linear so engine performance remains predictable and satisfying, similar to that of the V12 engine.

Of course the vehicle performance is completely transformed with a 0-60mph time of 3.1 seconds and a quarter mile time of 11 seconds @ 127.3mph, but it’s the mid-range in-gear acceleration that is most impressive and that you will use every time you drive the car!

Power - before and after

Power – before and after

Torque - before and after

The system has been professionally engineered and is fully reversable if needed. A new intake manifold incorporates a high flow/high efficiency water to air intercooler system to manage and maintain optima charge-air temperature, larger fuel injectors take care of the increased full-throttle fuel demand, and of course a carefully calibrated ECU file with optimised camshaft timing, ignition timing and air/fuel ratio is provided. All parts necessary are included in the kit.

The Audi R8 V10 Supercharger System lit contents:

  • Eaton TVS2300 roots supercharger
  • 6061 Aluminum intake manifold
  • Internal bypass system
  • High flow dual throttle body inlet
  • Air water charge cooler system
  • Polypropylene water reservoir
  • OEM high density water radiator
  • Bosch water pump
  • High capacity Hitachi fuel injectors
  • Hard anodized 6061-T6 aluminum bracket
  • OEM 7 rib serpentine belt and tensioner FEAD
  • High flow MAF housings
  • 2x K&N induction filters with pre-filters
  • Hex Flash ECU tuning programming cable

The kit can be reviewed and purchased here http://shop.tdi-plc.com/catalog/engineering-supercharger-system-vf750-p-20061.html

The full range of Audi R8 upgrades and tuning components can be seen here http://shop.tdi-plc.com/catalog/parts-c-1_3189_3191_3242.html

Do you need any repair or service work done? You can find out how we can help here https://www.tdi-plc.com/road-car-optimisation/supercar-sanctuary/