CT9A HKS Hipermax R Coilovers

£2,190.00

Description

CT9A HKS Hipermax R Coilovers

LANCER EVOLUTION VIII MR CT9A

R

Code No. 80310-AM002

 

The fun to drive at will and the balance can be adapted from circuit to winding road. 
Reised Driving-Comfort, “Ultimate All-Rounder”

 

 

The model in the photo is CT9A.

 

 

 

Application

Engine4G63
Model Year04/02 – 05/03
Remarks

Specification

FRONTREAR
Damping force adjustment30 steps30 steps
Base valve
Height adjustable lower bracket
Upper mountSpherical bearingSpherical bearing
Inverted/Normal typeInvertedNormal
Damper/Spring layoutCoiloverCoilover
Spring rate change at factoryPossiblePossible
Damping force adjustment with wire
Helper spring
(Spring rate N/mm)
〇 (19.8)〇 (4.7)
Ride Heightmm
Factory *2Test dataAdjustable range
High – Low *3
Drivable range
High – Low *4
FRONTRide height *1651639694 ~ 619694 ~ 619
Against stock-43-550 ~ -750 ~ -75
REARRide height *1641665 ~ 617665 ~ 636
Against stock-25-1 ~ -49-1 ~ -30

 

*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS’ recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.

Kit information

Spring of Full Kit

FR
Spring rate N/mm(kgf/mm)137 ( 14.0 )137 ( 14.0 )
Free height (mm)200170
Spring typeStraightStraight
Recommended range to change spring rate N/mm(kgf/mm)±20 ( 2 )±20 ( 2 )

Specification of damper

FR
Damping force (Rebound/Damping)N*1790 / 559912 / 461
Default position of dial1515
Remaining damper stroke (Rebound/Damping)mm52 / 4749 / 57

* The value of the damping force is at piston speed of 0.1m/sec.

Setting data

FR
DefaultTestDrivable limit
High *
Drivable limit
Low *
DefaultTestDrivable limit
High *
Drivable limit
Low *
Length of
case (mm)
291280331265393411389
Spring
Set length(mm)
254254258224224224
Length to ride hight
adjuster (mm)
3019700125143121
Lever ratio1.081.35

* Refer to the above explanation *3 of ride height information for drivable high and low limitations.

Test vehicle information

FR
Vehicle weight kg889 (870)570 (540)
Tire size (Air pressure) kPa255 / 35 – 18 ( 200 )255 / 35 – 18 ( 200 )
Wheel size9.0 JJ × 18 inset 229.0 JJ × 18 inset 30
Alignment
(Toe/Camber)
Test dataout 1.4 mm / -4°30′out 1.6 mm / -2°30′
Standard value0 ± 2 mm / -2°00′ ± 30′in 3 ± 2 mm / -1°00′ ± 30′

* Test data at HKS.

 

Parts List   * It may be changed without prior notice.

 

Point

The new SRF (Super Response Fluid) and LVS (Low Vibration Spring) have been adopted to achieve unprecedented levels of both driving and ride comfort.
The kit was tested with ADVAN A052 Tires(255/35R18) at Fuji Speedway Racing Course.
Althoguh the spring rate is 14 kgf/mm (F/R), harder than the HIPERMAX IV SP(F: 12 kgf/mm, R:10 kgf/mm), by making suspension supple with HKS know-hows, it improves the ride comfort on the street.
The kit has been set up as slight understeer, which makes you drive reliably and break the lap time while corning at high speed.
For those who aim for breaking the record, we recommend 2 kgf/mm rate increase on the rear.
By adjusting damper force slightly tightened, it is suitable for tracks with high-grip tires such as ADVAN A052. On the other hand, the recommended damping force is slightly loosened to enjoy the weekend driving. Please experience it!
Please note that if the rear shock body length is lower than 389 mm, the upper arm and ride height adjuster may be interference.

CT9A HKS Hipermax R Coilovers please go here

For info on our full range of goods and services please go here