Description
FA20 HKS Oil Cooler Kit
Code no. 15004-AT010
It’s very important to control the oil temperature to enjoy driving.
Extreme increases in oil temperature can break down the oil and decrease its ability to lubricate, cool and clean the engine and can cause damage as a result. HKS Oil Cooler Kits are designed with advanced cooling technology which enables stable oil temperatures to extract the maximum ability from the engine.
Oil Cooler Kit for Vehicle Specification
The optimum size of the core and layout design improves cooling performance.
With the use of a new core, both cooling and pressure drop prevention are balanced at a high level. Some vehicle applications contain air guides that maximize the airflow through the oil cooler core during vehicle operation, even in drifting applications where the car may not be facing in the direction it is pointing.
* Some kits are the factory replacement type.
S TYPE
HKS Oil Cooler Kit S Type is a sandwich-type which has a built-in thermostat attachment.
The core on the above photo is different from the actual core included in a kit.
HKS Oil Cooler S Type included a built-in thermostat attachment, and which is held in place by the oil filter. The minimum number of components allows simple installation.
HKS Oil Cooler S Type includes a built-in thermostat attachment, and which is held in place by the oil filter. Also, it provides superior cost performance.
[ Oil Temperature Meter: Oil Pressure Gauge Installation Hole]
Adaptor Thermo: M12×P1.25 (1hole) , PT1/8 (1 hole)
Note on Installation of Universal Oil Cooler Kit
Before Purchasing the Product
- There are inapplicable vehicles depending on vehicles’ specifications.
- Check the following to make sure the kit is compatible with your vehicle.
1. Screw Size for Oil Filter Installation
The screw size must be 3/4-16UNF or M20×P=1.5.
2. Clearance for Attachment Installation
To install the engine block attachment, adequate clearance is required. See the diagrams below. (In unit of mm)
3. Oil Filter
The screw can be installed properly as shown in the diagram on the right.
Newly designed single tube type fitting. Engine dyno tests and experience from D1 racing found that the oil pressure of the FA20 engine is extremely high compared to most conventional mass-produced engines. (Max oil pressure: over 12kgf/cm2) New single tube fitting withstanding the high oil pressure was designed and included in this kit.Features
- Installing the core to the inner side of the fender enables a vehicle tuned with GT Supercharger to install a front mount type intercooler kit. Also, a special air guide is included to provide higher cooling performance; this kit is also recommended for NA vehicles who enjoy circuit driving.
- Special spacer and center bolt are included so the kit parts do not come in contact with the brim on the oil filter installation position when installing the oil cooler attachment.
HKS Oil Cooler Kit for 86/BRZ is now available! This Pro Kit includes main parts so it can be installed to 86 and BRZ with various specifications such as forced induction engine, exterior upgrade, etc. It includes a 15 row core to provide cooling performance and ease of installation. Comes with 4m of cooling hose, oil filter space to prevent coming in contact with oil filter flange, and 4 fittings along with banjo bolts for install.
* The oil temperature of a vehicle without the oil cooler reached 130C in the fifth minute; the vehicle had to be stopped to cool the oil temperature down. The oil temperature of a vehicle with HKS Oil Cooler was maintained around 105C through the test.
Reviews
There are no reviews yet.