HKS Hipermax S CP9A

£2,340.00

Description

HKS Hipermax S CP9A

hipermax s

Code No. 80300-AM003

 

Going beyond just ride comfort or handling performance, a new standard of “Driving Comfort” aims for comfort in ride but also in the peace of mind generated by handling performance and drivability . An uncompromising balance which delivers on all the demands of street driving.

 

 

HKS Hipermax S CP9A LANCER EVOLUTION Ⅵ

 

LANCER EVOLUTION Ⅵ CP9A

 

Application

Engine4G63
Model Year99/01 – 01/01
Remarks

 

Specification

FRONTREAR
Damping force adjustment30 steps30 steps
Base valve
Height adjustable lower bracket
Upper mountSpherical bearingRubber
Inverted/Normal typeInvertedNormal
Damper/Spring layoutCoiloverCoilover
Spring rate change at factoryPossiblePossible
Damping force adjustment with wire
Helper spring
(Spring rate N/mm)
〇 (19.8)〇 (19.8)
Ride Height mm
Factory *2Test dataAdjustable range
High – Low *3
Drivable range
High – Low *4
FRONTRide height *1646690 ~ 617690 ~ 617
Against stock-45-1 ~ -74-1 ~ -74
REARRide height *1634656 ~ 596656 ~ 596
Against stock-26-4 ~ -64-4 ~ -64

 

*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS’ recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.

 

Kit information

Spring of Full Kit

FR
Spring rate N/mm(kgf/mm)69 ( 7.0 )59 ( 6.0 )
Free height (mm)200200
Spring typeStraight Barrel typeStraight
Recommended range to change spring rate N/mm(kgf/mm)±20 ( 2 )±20 ( 2 )

 

Specification of damper

FR
Damping force (Rebound/Damping)N*868 / 515682 / 348
Default position of dial1515
Remaining damper stroke (Rebound/Damping)mm56 / 4364 / 62

* The value of the damping force is at piston speed of 0.1m/sec.

 

Setting data

FR
DefaultTestDrivable limit
High *
Drivable limit
Low *
DefaultTestDrivable limit
High *
Drivable limit
Low *
Length of
case (mm)
296323291398415398
Spring
Set length(mm)
239224262245245275
Length to ride hight
adjuster (mm)
509222617831
Lever ratio1.051.28

* Refer to the above explanation *3 of ride height information for drivable high and low limitations.

Test vehicle information

FR
Vehicle weight kg- (820)- (540)
Tire size (Air pressure) kPa225 / 40 – 18 ( 220 )225 / 40 – 18 ( 190 )
Wheel size7.5 JJ × 18 inset 287.5 JJ × 18 inset 33
Alignment
(Toe/Camber)
Test datain 0 mm / -1°18′in 0 mm / -0°36′
Standard valuein 0 ± 3 mm / -1°00′ ± 0°30′in 3 ± 2 mm / -1°00′ ± 0°30′

 

Parts List

 

Suspension Components

For info on HKS Hipermax S CP9A please go here

For info on our full range of goods and services please go here