Life Racing PDUx6 48V

£7,194.00

SKU: SKU-20232-1-2-1-2-1 Categories: , Tags: , , , , ,

Description

Life Racing PDUx6 48V

The PDUx6 represents the latest advancements in microprocessor controlled power distribution systems. The PDUx range offers advanced features such as the ability to sleep and wake via CAN bus messaging or by using hardware pins including the ability to wake/sleep upon the triggering of certain user-specified sensor inputs. The PDUx6 comes equipped with an impressive 64 programmable outputs in total, including 10 extremely capable multifunction outputs which can be defined by the user to operate in either discreet high-side or low-side switching, low-side PWM, Half or Full bridge operation. These flexible outputs, as well as the PDU’s 16 input channels and additional 4 lowside PWMs, can be used to augment the I/O compliment of any Life Racing ECU product connected using the powerful “slave-link” feature.

Features

  • Schematic based calibration including logic simulation tool
  • I/O slaving to an LR ECU
  • Low power state woken on physical input, CAN activity, or specific CAN frame

Outputs

  • 64 main Power Outputs
    • 10 multifunction high side, low side, PWM, H-Bridge outputs
    • (40A continuous, soft-start inrush limiting 40A)
    • 10 High Side outputs (40A continuous, hard-start inrush 125A)
    • 44 High Side outputs (15A continuous, hard-start inrush 50A)
    • Output teaming to support very high current devices
  • 4 Additional Low Side Outputs (PWM capable)
  • All outputs short circuit and thermally protected with multi-stage in-rush control
  • Combined diagnostic output with reset input
  • Up to 64 soft outputs via CAN

Inputs

  • 16 physical switch inputs or, when slaved, general purpose analogue sensor inputs including:
    • 8x frequency measurement inputs (4 optionally bi-polar)
    • software selectable 3k ohm pull-up resistors
    • 4x inputs capable of programmable “wake up” functionality
  • Dedicated wake pin
  • Up to 64 soft inputs via CAN with configurable validation and debounce time

Interfaces

  • 2x 100Mbit/s full duplex Ethernet (can be used as Ethernet switch)
  • 3x CAN 2.0B
  • RS232C serial interface
  • LIN Bus

Power Supply

  • 6.5V to 20V input voltage (12V option)
  • 6.5V to 24V input voltage (24V option)
  • Dedicated 12V logic power input
  • Regulated 5V sensor supply output with short circuit protection

Physical

  • 2 Leavyseal connectors with a total of 113 pins
  • Amphenol SurLok Power Stud
  • Machined Aluminium enclosure
  • 215x140x57mm (including connectors)
  • Operating Temperature up to +85C

RELATED PRODUCTS

For info on our full range of goods and services please go here.

Also visit here for any more info about Life Racing PDUx6 48V

 

Reviews

There are no reviews yet.

Be the first to review “Life Racing PDUx6 48V”